Easy Operate N95 Face Mask Making Machine / N95 Particulate Mask
Machine Medical
N95 mask equipment is the special equipment for the production of
disposable N95 masks.It can automatically complete the mask body
molding,automatic nose bridge reinforcement, and automatic ear band
welding.
It is the auto equipment which is used to the product of face
masks,It suitable for the material of non woven fabric, activated
carbon and filter material from 1-5 layers. The face mask machine
will finish all the processing from the feeding to nose-clip
fixing, edge sealing, cutting the finished products.
According to the different materials you use, the finished products
can reach the standards as N95, FFP2, etc.This face mask machine
has features as stable performance, high productivity, low error
rate and easy operation, etc.
| Size | 6800mm(L)×3600mm(W)×1900mm(H) |
| Mask specification | 175*95mm |
| Production efficiency | 100-120PCS/min |
| Qualification rate | 98-99% |
| Failure rate | 2% |
| Weight | ≤2100kg, ground load bearing > 300kg |
| Working power | 220VAC ± 5%, 50z, rated power about 6.5-8.5KW |
| Compressed air | 0.5 ~ 0.7MPa, the use flow rate is about 300L / min |
| Operating environment | temperature 10 ~ 35 ºC, humidity 5-35% HR, no flammable and
corrosive gas, no dust (cleanness not less than 100,000). |
Plane Mask Production Process:
1) Three layers of non-woven fabric materials are stacked together
through a machine
2) Roll up and stitch the nose clip into it
3) Make a large piece of non-woven fabric gradually narrow from
left to right along the slope to make a "folding structure"
4) Tableting: flatten the surface of the mask
5) Fully automatic single cutting and hemming of masks
6) Then use a non-woven fabric to trim the mask
7) Cut the edge again
8) Fix the hanging ear rope by hot pressing
9) Finally pass the quality inspection, sterilize and package the
finished product
Warranty period and service
During the warranty period, if it is a product quality problem, the
supplier shall be responsible for the maintenance and provide the
maintenance accessories (vulnerable parts, such as ultrasonic waves
and mufflers, force majeure or the buyer's reason for the equipment
damage, it does not belong to the quality warranty scope).If the
equipment is damaged due to the buyer's fault, the maintenance fee
shall be borne by the buyer. If the buyer USES repair services or
replacement parts not provided by the supplier or approved by the
supplier, the warranty period will be suspended in advance.
