Weight 1550kgs N95 Face Mask Making Machine Size 4600 * 3100 * 1900mm
The N95 automatic mask production line is used to produce N95 mask
with a built-in nasal bridge,which is composed of a piece of
molding equipment, ear strap welding equipment, mask folding
equipment, and folding welding equipment.The equipment has the
advantages of stable production performance, fast filming speed,low
defect rate and easy to operate.
This product is a full-automatic medical mask production line,
which realizes the entire automatic operation and simple operation.
The whole process only needs 1-2 people to operate, and the labor
cost is minimized. 3600-12000 masks can be produced per hour,
and the output is 246,000-2250000 pieces in 24 hours. The
production cost can be recovered after 7--15 days in 24-hour
production.
Due to the large global demand and many orders, the delivery date
needs to be determined after negotiation.
| Machine Size | 4600*3100*1900mm (L*W*H) |
| Machine Weight | 1550kgs |
| Speed (pcs/min) | 246,000-2250000 pcs / 24 hours |
| Voltage | 220V |
| Total Power | 6.5KW |
Machine advantages:
1. Cutting roller
We use the chrome steel to cover the rubber roller both sides .So
that the rubber is not crack from side after extended periods use.
2. Traction roller
We use the silicone rubber materials instead of the butyronitrile
materials .The silicone rubber materials is good abrasion
resistance and will not crack
3. PLC touch screen
We use DELTA group brand PLC touch screen .
4. Mask nose strip tension controller
We use Mask nose strip tension controller .This device can avoid
the nose strip differ in length .
5. Nose strip straight- feeding device
We use Nose strip straight- feeding device , It can ensure the nose
strip be feeded straightly in the processing, so the finished mask
will be flat and artistic.
7. Non woven raw materials sensors
We use Non woven raw materials sensors,once the raw materials use
up,machine will stop automatically
8. Raw materials tension controller 1
We use the Raw materials tension controller to avoid the materials
plugging .
9. Raw materials tension controller 2
Our machine is equipped with two braking ways . One is belts
pressing and another is screw fixing . You could choose either one
or use both according to your need.
10. Raw materials EPC device
We use raw materials EPC device ,to do materials adjustment.
11. Machine door lock
We just door lock ,with out the key,worker can not start the
machine.
12. Frequency converter
We use DELTA group brand frequency converter .
13. Machine body and materials feeding connect board,We connect
Machine body and material feeding frame with connecting boards,so
that the running of whole machine will be very stable.
14. Electrostatic eliminator
In our machine we have one electrostatic eliminator . to eliminate
non woven mask surface static.
15. Machine motor
Our geared motor is new type and no need refuel.
16. Fan
We install the fan near the ultrasonic horn ,to Lower the horn
temperatures,to to extend ultrasonic life.
Standard export packaging:
1. Apply anti-rust oil to the equipmenteasy rustypart and carry out
anti-rust treatment.
2. The whole machine was wrapped with stretch film for
protection,and the equipment control cabinet and other components
are protected against shock with packaging materials like XPS foam
board and EPE foam sheet.
3. Reinforceeasy-movepart of the equipment.
4. Put desiccant before packaging to avoid rusting equipment during
sea transportation.
5. Use New Zealand imported bluish pine wood or American Douglas
fir wood as the bottom support, 12mm multi-layer plywood for side
panels, all wood fumigated. We cooperated withexperienced and
professionalexported wooden packaging manufacturing enterprises to
make final package.
